NAVIGATION
NAVIGATION
中文品名：ALCAD镍镉电池
Alcad’s robust Ni-Cd pocket plate technology is particularly well suited to the complex requirements of installations in difficult and demanding conditions, and in remote and inaccessible locations. <Versatility for industry> Alcad Single Cell nickel-cadmium (Ni-Cd) batteries offer the versatility to industry where reliable performance is crucial, even under extreme operating conditions, for example in :• Refineries • Power plants • Onshore and offshore oil & gas applications • Substations • Airports • Building infrastructure <Reliability for backup power application> If primary power sources fail, Alcad batteries enable your backup system to provide vital systems support to keep operations moving until primary power is restored or a controlled shutdown can be performed, including for : • UPS (Uninterruptible Power Supply) • Switching and transmission • Emergency and security • Industrial fire monitors and alarms • Process control • Substation switchgear • Signaling
<Security for starting applications> For generator starting or switching on heaters, pumps and other essential equipment in an emergency, Alcad batteries meet the specific need for high discharge, instant voltage recovery and reliable operation, even in extreme temperatures. The LCE range has the thickest plates and is designed for applications where the battery is required to provide a reliable source of energy over relatively long discharge periods. Normally, the current is relatively low in omparison with the total stored energy and the discharges are generally infrequent. Typical uses are power backup, communications and bulk energy storage. Capacity range : 10 Ah – 375 Ah. <Standard layouts> Alcad has developed a series of standard layouts in which a battery may be ordered. Whether the battery is being installed on a rack, in a cabinet or is simply freestanding, the same configuration principles can be applied. Recommended charging voltage: For two level charge: • Float level: 1.42 ± 0.01 V/cell for LCE • High level: 1.47 - 1.70 V/cell for LCE, A high voltage will increase the speed and efficiency of the recharging. For single level charge: 1.43 - 1.50 V/cell.
Alcad坚固的Ni-Cd袖珍板技术特别适合于在困难和苛刻的条件下以及偏远和难以进入的位置安装的复杂要求。Alcad单电池镍镉(Ni-Cd)电池为需要可靠性能的行业提供了多功能性，即使在极端的操作条件下也是如此，例如：·炼油厂·发电厂·陆上和海上油气应用·变电站·机场·建筑基础设施<备用电源应用的可靠性>如果主电源发生故障，Alcad电池使您的备用系统能够提供重要的系统支持，以保持运行，直到主电源恢复或可以执行受控关闭。包括：·UPS(不间断电源)·开关和传输·紧急和安全·工业火灾监测和报警·过程控制·变电站开关设备·信号。
<启动应用的安全性>对于发电机在紧急情况下启动或接通加热器、泵和其他基本设备，Alcad电池可满足高放电、即时电压恢复和可靠运行的特殊需求，即使在极端温度下也是如此。LCE系列具有最厚的极板，专为需要电池在相对较长的放电期内提供可靠能源的应用而设计。通常情况下，与总储能相比，电流相对较小，放电一般不频繁。典型的用途是电源备份、通信和大容量能量存储。容量范围：10Ah-375Ah。<标准布局>Alcad开发了一系列可订购电池的标准布局。无论电池是安装在机架上、机柜中还是简单地独立安装，都可以应用相同的配置原则。推荐充电电压：两级充电时：·浮点数：1.42±0.01V/cell；LCE：1.47~1.70V/cell；高电压可提高充电速度和效率。单级充电：1.43-1.50V/节。
