Engine/Bearing/770831-770852 BALL BEARING SINGLE ROW, ANGULAR CONTACT

中文品名:单列滚珠轴承,角接触

Series 7300.  30o Angular Contact

7300系列。30度角接触

The raceways of these bearings have a high shoulder on one side and a very low shoulder on the other side and the inner and outer raceways are assembled opposite to each other so that the bearings are primarily designated to carry thrust load in one direction.  This construction permits use of the optimum number and size of balls for maximum load capacity.  Since these bearings will carry thrust load in one direction only, they are usually mounted in a pair opposed to each other and the axial clearance is adjusted by shims, threaded members, or preloading springs.  The standard contact angle is 30° and bearings made to 40° contact angle have the suffix “B”. 

这些轴承的滚道一侧有一个高肩,另一侧有一个非常低的肩部,内外滚道相互相对组装,因此轴承主要被指定为在一个方向上承载推力载荷。这种结构允许使用最佳数量和大小的球,以获得最大的承载能力。由于这些轴承只在一个方向上承载推力载荷,因此它们通常成对安装在彼此相对的位置,轴向游隙通过垫片、螺纹构件或预加载弹簧进行调整。标准接触角为30°,接触角为40°的轴承有后缀“B”。

X
REQUEST FOR QUOTE

Submitted successfully !

X
REQUEST FOR QUOTE
No. 101855
770831-770852 BALL BEARING SINGLE ROW, ANGULAR CONTACT
Unit:PCS
Quantity:
+
-
Add to request for quote
REQUEST FOR QUOTE REQUEST QUOTE
ADD CUSTOM PRODUCT