Engine/Valves & Cocks/756356-756366 BUTTERFLY VALVE DIN CAST IRON, MONOFLANGE #6110

中文品名:DIN铸铁蝶阀,单法兰, #6110

Ductile cast iron butterfly valve, monoflange type with centric disc, one piece shaft supported by bronze radial bearings for smooth operation, rubber lined body.  The rubber liner is vulcanized integrally to body and bearings ensuring reduced torque and a long lifetime.  This liner extends along the valve faces, eliminating the use of gaskets.  The body with monoflange is suitable for mounting between flanges according to DIN PN10.  Due to the monoflange design, this valve can be used as end of line valve.  Face to face dimensions are according to ISO5752/EN558 basic series 16, API 609, DIN 3202 K3 and BS5155.  For easy adaption of both manual and automatic actuators the valve is executed with a topflange according to ISO5211 standard.  Further applications of series 60 butterfly valves can be found amongst others in general industrial and maritime systems for media such as (ballast) water, gases, hydrocarbons and light corrosive media up to a maximum of 10 bar.

球墨铸铁蝶阀,单法兰式中心阀瓣,一体式主轴由青铜径向轴承支撑,运行平稳,橡胶衬里阀体。橡胶衬里与阀体和轴承整体硫化,确保扭矩降低,使用寿命长。这种衬里沿着阀面延伸,省去了垫圈的使用。根据DIN PN10标准,带单法兰的阀体适合安装在法兰之间。由于采用单法兰设计,该阀门可用作管路末端阀门。面对面尺寸符合ISO5752/EN558基本系列16、API 609、DIN 3202 K3和BS5155。为了便于手动和自动执行机构的适配,阀门采用符合ISO5211标准的顶法兰执行。除了其他用途外,60系列蝶阀还可用于一般工业和船舶系统,用于(压载)水、气体、碳氢化合物和最大10bar的轻腐蚀性介质等介质。



X
REQUEST FOR QUOTE

Submitted successfully !

X
REQUEST FOR QUOTE
No. 102246
756356-756366 BUTTERFLY VALVE DIN CAST IRON, MONOFLANGE #6110
Unit:PCS
Quantity:
+
-
Add to request for quote
REQUEST FOR QUOTE REQUEST QUOTE
ADD CUSTOM PRODUCT