Engine/Metal material/673821 GRATING FIBERGLASS PHENOLIC, WITH FURTHER DETAILS

中文品名:玻璃纤维酚醛格栅

High strength, Fire integrity composite grating for ships.  DURAGRID® Phenolic is the “Fit it and Forget it” solution to walkway grating aboard ship.  Corrosion- and fire- resistance has made this product a champion in the offshore Oil and Gas industry for over a decade.  Features:  Strength typically greater than steel grating, No Rust- typically outlasts the ship’s lifespan (can be transferred), Dependable Anti-Skid surface for Safety and Comfort, Lightweight, Easy to install.  Regulatory Information:  DURAGRID® Phenolic is a USCG Type Approved¹ grating which also has numerous Class Approvals such as ABS, DNV, and LR. For a current list of these approvals, please contact Strongwell directly.   For more information on US Coast Guards use of composite grating go to http://www.uscg.mil/hq/cg5/cg5214/. Customers are responsible for consulting the Structural Fire Integrity Matrix and determining their own risk assessment.  Typical Ship Applications:  Center passage walkway grating, Oil spill tank grating, Winch stand grating, Flying passage (LNG) grating, Manifold grating, Lashing bridge grating, Monkey stage grating, Wheel house stage grating, Gangways - Safe access to bow.  Availability** & Panel Sizes:  Houston or Factory 3 x 20 ft or 4 x 20 ft, Singapore or Factory 3 x 20 ft or 4 x 20 ft, Rotterdam or Factory 1 x 6 M, Standard panels: 3ft x 20ft, 4ft x 20ft or 1M x 6M. , Standard thickness (height): 1.5” (38 mm), Weight: 3.2 lbs/SF (15.6 kg/M²)  **Strongwell can also drop ship to a specific location or port.  Performance:  312 PSFU (14.9 kN/m2) uniform loading* (SF [Safety Factor] + 6:1) , 700 PSC (10.2 kN/m) concentrated loading* (SF + 5:1)  *Based on a deflection of .25 in or 6 mm  Installation:  DURAGRID® Phenolic installs the same way steel grating is installed.  The bearing bar is the load carrying member which runs between supports.  This is the panel length and is typically designated with a (BB) after the dimension to avoid confusion.  DURAGRID® Phenolic does not require any banding after cutting.   Loads are effectively transferred by a series of cross-rods spaced every 6” (150 mm) (sometimes referred to as “cross-rod pitch”).  Installation is easy; the grating can be cut using simple hand tools such as a circular saw (diamond or masonry blades suggested) or a jig saw (carbide grit blades suggested).   Panels are lightweight – single panels are typically moved by hand.  When ordering, please specify:  Square Foot (SF) or Square Meter (M²) Measurements of the areas that needs grating, Hardware (Part # 744 clip & 797 bolt set) – 4 clips per panel or 4 clips per M2

高强度、耐火完整性船用复合格栅。DURAGRID®酚醛是船上人行道格栅的“合身即忘”解决方案。十多年来,该产品的耐腐蚀性和耐火性使其成为海上石油和天然气行业的冠军产品。特点:强度通常大于钢格栅,不生锈-通常超过船的使用寿命(可以转移),可靠的防滑表面,安全舒适,重量轻,易于安装。法规信息:DURAGRID®酚醛是一种USCG型认证?光栅,还拥有多个类别认证,如ABS、DNV和LR。有关这些批准的最新名单,请直接联系Strongwell。有关美国海岸警卫队使用复合格栅的更多信息,请访问http://www.uscg.mil/hq/cg5/cg5214/.。客户有责任参考结构防火完整性矩阵并确定自己的风险评估。典型船舶应用:中心通道人行道格栅、溢油舱格栅、绞盘立式格栅、飞行通道格栅、歧管格栅、绑扎桥格栅、猴子台格栅、轮房格栅、舷梯-安全进出船头。可用性**及面板尺寸:休斯顿或工厂3 x 20英尺或4 x 20英尺,新加坡或工厂3 x 20英尺或4 x 20英尺,鹿特丹或工厂1 x 6米,标准面板:3英尺x 20英尺、4英尺x 20英尺或1米x 6米。,标准厚度(高度):1.5“(38毫米),重量:3.2磅/平方英尺(15.6千克/平方米)**斯特龙韦尔还可以将船只投放到特定的地点或港口。性能:312 PSFU(14.9 kN/m2)均匀载荷*(SF[安全系数]+6:1),700 PSC(10.2 kN/m)集中载荷*(SF+5:1)*基于0.25英寸或6 mm安装的挠度:DURAGRID®酚醛安装方式与钢格栅的安装方式相同。承重杆是在支承之间运行的承重构件。这是配电盘长度,通常在尺寸后面加上(BB)以避免混淆。DURAGRID®酚醛树脂切割后不需要任何条带。载荷通过每隔6英寸(150毫米)间隔的一系列横杆有效地传递(有时称为“横杆间距”)。安装简单;可以使用简单的手动工具切割格栅,例如圆锯(建议使用钻石或石工刀片)或夹具锯(建议使用硬质合金磨片)。嵌板是轻便的-单个嵌板通常是手动移动的。订购时,请指定:需要格栅的面积的平方英尺(SF)或平方米(M²)尺寸,硬件(部件号744夹子和797螺栓套装)-每个面板4个夹子或每个M2 4个夹子。


X
REQUEST FOR QUOTE

Submitted successfully !

X
REQUEST FOR QUOTE
No. 102246
673821 GRATING FIBERGLASS PHENOLIC, WITH FURTHER DETAILS
Unit:Sht
Quantity:
+
-
Add to request for quote
REQUEST FOR QUOTE REQUEST QUOTE
ADD CUSTOM PRODUCT