Engine/Pneumatic & Electrical tools/590361-590362 CHIPPING HAMMER PNEUMATIC

Powerful hammers for billet chipping, general chipping and the removal of calking/weld flux, paint and rust in limited space.  There are two kinds of shank types, round or hexagon, are available.  When ordering, please specify which shank model is required.  Required air pressure is 0.59 MPa (6 kgf/cm2).  The specifications listed here are for your reference.  If you wish to order chipping hammers from a specific manufacturer, please refer to the comparison table listing major international manufacturers and product model numbers on page 59-8.

强大的锤子,可在有限的空间内进行钢坯破片、普通破片和除渣/焊剂、油漆和锈蚀的处理。有圆柄和六角柄两种类型可供选择。订购时,请注明所需的刀柄型号。所需气压为0.59兆帕(6kgf/cm2)。这里列出的规格供您参考。如果您想从某一特定制造商订购切片锤,请参阅第59-8页列出的主要国际制造商和产品型号的对照表。

X
REQUEST FOR QUOTE

Submitted successfully !

X
REQUEST FOR QUOTE
No. 102009
590361-590362 CHIPPING HAMMER PNEUMATIC
Unit:SET
Quantity:
+
-
Add to request for quote
REQUEST FOR QUOTE REQUEST QUOTE
ADD CUSTOM PRODUCT