NAVIGATION
NAVIGATION
Used for coating repair, coating removal, steel surface preparation and anti-fouling removal, and designed to accept any media heavier than water and has a blast rating of up to 12 bar (175 PSI).
Vapor Abrasive blasting is similar to dry blasting, except that the blast media is moistened prior to impacting the surface and creates up to 92% less dust than traditional dry blasting. Because dust is minimized, less containment may be required and media clean-up time can be reduced. The EcoQuip2 blasters use less water than slurry or other water-based blasting technologies, so no pools of water are left behind, and less need to worry about toxic runoff. The end result is a cleaner, more effectively contained process. The EcoQuip2 blasting units are designed for years of safe and solid onboard maintenance. Determining the pressure setting for your application
1.8 - 3.8 Bar (25-55 psi) Cleaning Soft Metals, Wood, Aluminium, Efflorescence Removal, Graffiti Removal, Parts Cleaning 3.9 - 6.2 Bar (56 - 90 psi) Line Stripe Removal, Pitted Paint Removal, Rust Removal 6.2 - 8.3 Bar (91 - 120 psi) Steel Surface Prep and Coating Removal 8.3 - 12 Bar (121-175 psi) White Metal Blast to Near White Metal Blast, Removal of Layered Coatings and Polyurea Removal. A high production, entry-level skid unit. Designed to tackle most typical blasting applications. The EQs is built according to extremely strict standards and can be stacked safely on a platform or a ship deck. Standard models have a coated crash frame and enclosure. *Packages include 15 m (50 ft) blast hose with electric or pneumatic blast controls (machine accepts either type of hose), #8 HP nozzle and tool kit.
用于涂层修复、涂层去除、钢表面处理和防污垢清除，设计可接受任何比水重的介质，喷丸额定值最高可达12巴(175 PSI)。
蒸汽磨料喷砂与干式喷砂相似，不同之处在于喷砂介质在撞击表面之前被润湿，产生的粉尘比传统的干式喷砂少92%。由于将灰尘降至最低，因此可能需要更少的容器，并且可以减少介质清理时间。与泥浆或其他基于水的爆破技术相比，EcoQuip2爆破器使用的水更少，因此不会留下水池，也更不需要担心有毒径流。最终结果是一个更干净、更有效的控制过程。EcoQuip2爆破装置专为多年安全可靠的机上维护而设计。确定应用程序的压力设置。
1.8-3.8 bar(25-55 psi)清洁软金属，木材，铝，风化去除，涂鸦去除，零件清洗3.9-6.2 bar(56-90 psi)线条去除，坑漆去除，除锈6.2-8.3 bar(91-120 psi)钢表面准备和涂层去除8.3-12 bar(121-175 psi)白金属喷砂到接近白色金属喷砂，去除分层涂层和聚脲去除。一种高产量、入门级的防滑装置。专为处理大多数典型的爆破应用而设计。均衡器是根据极其严格的标准建造的，可以安全地堆放在平台或船甲板上。标准型号有涂层防撞框架和外壳。*套装包括15米(50英尺)带电动或气动喷射控制的喷射软管(机器可接受任何一种软管)、#8 HP喷嘴和工具包。
